Lamp - Chauvet Followspot 1200 Quick Start Manual

Setup

Lamp

The user may have to install the lamp before operating the Followspot 1200
for the first time.
The instructions below include the steps to remove an existing lamp as well
as to install a new lamp.
Lamp
Removing an already installed lamp requires caution. Follow the steps
indicated below to complete the removal in a safe manner.
Removal
Make sure that there is no power applied to the fixture before opening
the fixture's housing.
Lamp explosion hazard! Wait 15 minutes after having turned off the
fixture to open the lamp cover.
Opening the
1) Unfasten the thumbscrew (T) and slide the front cover (FC) slightly
Fixture
2) Loosen the thumbscrew that hold the lamp cover (LC) and lift it to expose
Lamp Removing
Diagram
• Always wear safety goggles and soft gloves when handling the
• The bulb remains hot for a long time after turn off.
• Never touch the bulb barehanded and always handle it by its
Removing an
1) Once you have access to the lamp, loosen both lamp end screws.
Existing Lamp
2) Grab the lamp by both lamp end screws, push it evenly against the clips
3) Place the lamp in an appropriate container for disposal.
Always follow local regulations regarding the disposal of used metal
halide lamps.
6
All manuals and user guides at all-guides.com
forward.
the lamp socket.
L
FC
T
lamp.
metallic contacts.
and then slide it upwards until it is free.
LC
Followspot 1200 Quick Start Guide Rev. 3