Figure 2.1
Hardware Connections for the LSI22910
Channel B
68-pin Internal
High Density
SCSI Interface
J4
Channel B
68-pin External
High Density
SCSI Interface
J3
Channel A
68-pin External
High Density
SCSI Interface
J2
Step 6. Carefully insert edge connector J1 (see
adapter into the PCI slot. Make sure the edge connector is
properly aligned before pressing the board into place as shown
in
Figure
2.2.
Note:
You may notice that the components on a PCI host adapter
face the opposite way from non-PCI adapter boards you
have in your system. This is correct, and the board is keyed
to go in only one way.
Detailed Installation Procedure
Channel A
68-pin Internal
High Density
SCSI Interface
J5
LSI22910 to PCI Bus
Connection on Mainboard
J1
Channels A & B
Busy LED
Connector
J6
Figure
2.1) of the host
2-5