Meyer Sound MM-4XP Operating Instructions Manual page 18

CHAPTER 3: THE MM-4XP LOUDSPEAKER
CAUTION: Make sure the MM-4XP loud-
!
speaker cables are wired correctly. For details
on assembling loudspeaker cables, see Appendix C,
"MM-4XP Cable Assembly."
5. Power on the MPS-488 and monitor the LEDs on the
front panel to verify connections (for more information,
see "Voltage and Load Current LEDs (1–8)" on page 9).
6. Check the MM-4XP LEDs on the rear panel and verify
they are green (ready to reproduce audio).
7. Enable output from the audio sources (from the mixer or
processor) connected to the MPS-488.
18