Advertisement
Quick Links
MSL-10A
Loudspeaker
Operating Instructions
The Meyer Sound MSL-10A is an extremely high-
power, high-performance loudspeaker designed for
large-scale music reinforcement and public address
applications. It is a biamplified system consisting
of four proprietary 12" cone drivers in a unique
horn-loaded vented enclosure, and three 2" high
frequency drivers (4" diaphragm diameter) with
vertical 40-degree horns. The MSL-10A is a full-
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
range loudspeaker constructed as a 30-degree
arrayable section, and is designed to be operated
with the Meyer Sound M-10A Control Electronics
Unit (one M-10A per channel). The M-10A com-
prises electronic crossover, Meyer Sound's exclu-
sive SpeakerSense™ driver protection circuitry,
and amplitude and phase response alignment
circuitry optimized for the loudspeaker.
Advertisement
Related Manuals for Meyer Sound MSL-10A
Summary of Contents for Meyer Sound MSL-10A
- Page 1 MSL-10A Loudspeaker Operating Instructions The Meyer Sound MSL-10A is an extremely high- range loudspeaker constructed as a 30-degree power, high-performance loudspeaker designed for arrayable section, and is designed to be operated large-scale music reinforcement and public address with the Meyer Sound M-10A Control Electronics applications.
- Page 2 100 feet). Located next to the environmental power cable connec- tor on the rear panel of the MSL-10A are the environ- Note: If you are using a standard Meyer Sound MSL-10A mental power indicator and circuit breaker.
- Page 3 2 meters distant. Note the frequency re- sponse and overall level. • Reconnect the loudspeaker cable to the MSL-10A amplifier/drive rack. • Leaving the first loudspeaker connected, connect the adjacent one and observe the analyzer display.
- Page 4 MSL-10A Loudspeaker Operating Instructions The MSL-10A loudspeaker is designed to function as a rectional, the radiation is confined to an area that is Arraying and modular building block capable of being arrayed in mul- controlled by the array configuration. This yields excep-...
- Page 5 MSL-10A Loudspeaker Operating Instructions To increase the effective throw of the system, MSL-10A Long-Throw cabinets may be arrayed one atop another with high Arrays horns together, as shown in the illustration at the right. Spacer/hanger bars are used to couple the cabinets both horizontally and vertically, as illustrated below.
-
Page 6: Specifications
MSL-10A Loudspeaker Operating Instructions Acoustical MSL-10A / M-10A System Specifications 40 Hz - 16 kHz ±4 dB Frequency Response Maximum SPL at 100 feet Continuous 110 dB Peak 120 dB HF Coverage Horizontal 60 degrees Vertical 40 degrees MSL-10A Loudspeaker (one 30...