Connection To A Pc; Bridge Connection - Konftel 300M User Manual

Hide thumbs Also See for 300M:

Table of Contents

GENERAL

CONNECTION TO A PC



Connect the Konftel 300M to a computer using the USB cable provided.



Check that Konftel 300M USB Audio is selected as the sound unit in the computer's

settings.

Use as a conference unit

When connected to a PC, the Konftel 300M functions as a conference unit for VoIP

calls, which means that speakers and microphones are activated, as is advanced sound

management in OmniSound

VoIP (Voice over IP) calls are transmitted as data packets over the network/Internet. For

calls via PCs, you need VoIP software (e.g. Microsoft

web meetings whereby several users can communicate and share documents via their web

browser or special client software.

Some VoIP software has automatic adjustment of microphone and speaker levels as

standard. In certain situations this can produce a pulsating sound or cause problems

with full duplex. In such cases, switch off the automatic level regulation if possible,

and set the software manually to a suitable microphone level, allowing Konftel 300M

to manage sound processing.

As default, the sound via the mobile network and USB is bridge-connected. It is possible

to turn off the bridging if you do not want any sound from the computer to be heard

during mobile calls.

Press the

button.



Select bridging to be ENABLED or DISABLED and confirm by pressing OK.

Mini USB port for

PC connection

HD.

Lync

or Skype

) or a service for

Table of Contents