Copy Job Setting] - Develop ineo 164 User Manual

9
9.2

[COPY JOB SETTING]

Configure the paper for the paper tray.
Also, set the quality and density to adjust copy image quality.
%
Press the Menu/Select key ö [COPY JOB SETTING].
Settings
[TRAY SELECT]
[TRAY1 PAPER]
[BYPASS PAPER]
[ZOOM RATIO]
[QUALITY]
[DENSITY]
[MODE MEMORY]
9-4
Select the paper tray loaded with the desired paper.
For details on loading paper, refer to page 3-4.
[SIZE] Select the size of the paper loaded in the paper
tray.
[TYPE] Select the type of the paper loaded in the paper
tray.
[SIZE] Select the size of the paper loaded in the paper
tray.
[TYPE] Select the type of the paper loaded in the paper
tray.
[FIXED] Select a preset zoom when copying from a fixed
size original onto a fixed size paper.
[MANUAL] The zoom ratio can be set between 50% and
400%.
[TEXT/PHOTO] Select this option when the original consists of
text and photos. The edge of the text is repro-
duced sharply, while photos are reproduced as a
smooth image.
[TEXT] Select this option when the original consists of
text only. The edge of the text is reproduced
sharply.
[PHOTO] Select this option when the original consists of
photos only. Photos are reproduced as a smooth
image.
[AUTO] The density level is automatically adjusted.
[MANUAL] The density level is manually adjusted.
Combine frequently used copy settings into programs and register them
with this machine. These programs can easily be recalled as programs. Up
to two programs can be registered.
[RECALL] Recall a program.
[REGISTER] Register a program.
[COPY JOB SETTING]
ineo 164
9.2