Specifications - Thermal Arc Fabricator 211i Operating Manual

FABRICATOR 211i

2.09 Specifications

Description
Power Source Plant Part No.
Power Source Dimensions
Power Source Mass
Cooling
Welder Type
Applicable Standard
Number of Phases
Nominal Supply Voltage
Nominal Supply Frequency
Welding Current Range (MIG Mode)
Wirefeed Speed Range
Effective Input Current (I1eff)
Maximum Input Current (I1max)
Single Phase Generator Requirement
MIG (GMAW/FCAW) Welding Output, 40ºC, 10
min
STICK (MMA) Welding Output, 40ºC, 10 min.
TIG (GTAW) Welding Output, 40ºC, 10 min.
Open circuit voltage
Protection Class
Note 1: The Effective Input Current should be used for the determination of cable size & supply requirements.
Note 2: Motor start fuses or thermal circuit breakers are recommended for this application. Check local re-
quirements for your situation in this regard.
Note 3: Generator Requirements at the Maximum Output Duty Cycle.
Additional safety precautions may be required when using unit in an environment with increased haz-
ard of electric shock . Please refer to relevant local standards for further information prior to using in
such areas.
Due to variations that can occur in manufactured products, claimed performance, voltages, ratings, all
capacities, measurements, dimensions and weights quoted are approximate only. Achievable capacities
and ratings in use and operation will depend upon correct installation, use, applications, maintenance
and service.
INTRODUCTION
Fabricator 211i Multi Process Welding Inverter
230V±15%
50/60Hz
10-210A
2.5 - 18 MPM
15 Amps
30 Amps
7 k VA
210A @ 20%, 24.5V
130A @ 60%, 20.5V
101A @ 100%, 19.1V
200A @ 25%, 28.0V
130A @ 60%, 25.2V
101A @ 100%, 24.0V
200A @ 25%, 18.0V
130A @ 60%, 15.2V
101A @ 100%, 14.0V
Table 2-1: Fabricator 211i Specifications
NOTE
2-4
W1004206
H435mm x W266mm x D617mm
26kg
Fan Cooled
Multi Process Inverter Power Source
EN 60974-1
Single Phase
140A @ 20%, 21.0V
99A @ 60%, 19.0V
77A @ 100%, 17.9V
125A @ 25%, 25.0V
80A @ 60%, 23.2V
60A @ 100%, 22.4V
150A @ 35%, 16.0V
115A @ 60%, 14.6V
90A @ 100%, 13.6V
79V
IP23S
INTRODUCTION
110V±15%
50/60Hz
10-140A
2.5 - 18 MPM
19.6 Amps
39 Amps
4.5 k VA
Manual 0-5225