Hiniker 9850 Operator's Manual page 10

8 Operating Procedures
Disconnect the three electrical connectors by
pulling them straight out from the receptacles.
Do not twist the connectors. Twisting will dam-
age the connector pins or the wiring harness.
Disconnect Plugs
Back inside the truck, return control of the head-
lights to the truck and switch power off on the
snowplow control box, then slowly back the truck
out from the plow.
Turn Off Lights And Power
NOTE: The stop plate will automatically fall for-
ward as soon as the lift cylinder is fully extended
for raising the blade prior to transporting the plow.
If the snowplow won't be used for an extended pe-
riod of time, the prong weldment can be removed
from the truck by removing the hex bolts that fas-
ten it to the truck mount frame.
DWG. NO. 5233
DWG. NO. 4164