Setting Up Screen Call - Sanyo SCP-3100 User Manual

SCP3100NZ060529qxd

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded
announcement, either one that is pre-recorded or one that you record.
You can also record the caller's message into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right softkey)
> Screen Call.
To set Auto Screen Call:
1.
Select
2. Select On and press
3.
Set the answering time by using numeric keys or by pressing the
navigation key up or down.
4.
Press
standby display.)
Tip:
If a new caller's message is waiting, the
The memos recorded while activating "Screen Call" are shown with the or
icon in the Voice Memo list ( : once played, : not played yet).
To listen to the message, see "Reviewing Voice Memos" on page 85.
Tip:
While the caller's message is being recorded, press
or press to stop recording and disconnect the call.
Selecting a Screen Call Announcement
To select a Screen Call announcement:
1.
Select
2. Depending on your preference, select Pre-Recorded or Custom
and press
Note:
To record your own announcement, see page 88.
9. Voice Services
06.5.29 1:28 PM
> Tools > Voice Services > Screen Call > Auto.
.
or OK (left softkey). (The
> Tools > Voice Services > Screen Call > Announcement.
.
Page 87
icon is displayed on the
icon appears on the display.
to answer the call,
87