Alert Notification - Sanyo SCP-3100 User Manual

SCP3100NZ060529qxd

Alert Notification

Your phone can alert you with an audible tone when you change
service areas, once a minute during a voice call, or incoming or
missed Push 2 Talk calls.
To set alerts:
1.
Select
2.
Select your desired option and press
Service sets an alert to notify you of network services
parameter changes.
Push 2 Talk sets an alert to notify you of Push 2 Talk calls.
Select Push 2 Talk Calls for incoming Push 2 Talk calls, or
P2T Missed for missed Push 2 Talk calls.
Voicemail sets an alert to notify you of voice messages. Select
Ringer Length to set the ringer length of Voicemail
notification.
Messaging sets an alert to notify you of Text and Picture Msg.
Select Ringer Length to set the ringer length of Messaging
notification.
Minute Beep sets a minute reminder that beeps ten seconds
before the end of each minute during a call.
Signal Fade sets an alert to notify you when your phone loses
a signal during a call.
3.
Use your navigation key to select a setting and press
Tip:
You can select
P2T Missed, Voicemail, or Messaging.
minutes for twenty minutes. (For Push 2 Talk Calls, it sounds for 20 seconds
continuously.)
30
06.5.29 1:28 PM
> Settings > Sounds > Alerts.
or if you select Push 2 Talk Calls,
Once Repeat Alert
Repeat Alert
Page 30
.
sounds an alert every two
2. Your Phone's Settings
.