Sanyo SCP-3100 User Manual page 116

SCP3100NZ060529qxd
Making a Push 2 Talk Call (1-to-1 Call)
You can place a 1-to-1 Push 2 Talk call by selecting a contact from the
Push 2 Talk List.
To place a Push 2 Talk call by selecting a contact:
1. Press P2T (left softkey) or
2. Press Go to (left softkey), select the list from which you want to
place a call (Personal List, Outgoing, Incoming, or Missed), and
press
Tip: You can also select
(See page 112 for details.)
3.
Scroll to the contact you want to call, and press and hold
to place the call and take the floor. (You will see "P2T calling..."
and "Connecting..." followed by "You have floor." You can now
begin speaking.)
– or –
Scroll to the contact you want to call and press and release
above, "Floor is open." will appear on the screen and either you
or your contact may press and hold
speak.)
Note:
During a Push 2 Talk call, the
" Floor is open. ," the first person to press the Push 2 Talk/Memo button
speak (while holding the button). Only the person who has the floor can speak.
The phone beeps if you press
4.
Continue holding
speaking, release
When the other party takes the floor, you will see the speaker's
name and phone number and the text "has floor.")
5.
When you are finished, press
Note: When neither party has the floor during a Push 2 Talk call, "
appears on the display. If no one takes the floor for 20 seconds, the Push 2 Talk
call ends automatically.
Tip:
If you press
voice call.
110
06.5.29 1:28 PM
.
from the
Enter P2T#
to place the call. (The call will connect as described
floor
when another contact has the floor.
as you speak. (When you are finished
to allow the other contact to speak.
or during step 3 above, you can make a standard
Page 110
.
option to enter a Push 2 Talk List.
Go to
to take the floor and
is the right to speak. When you see
.
can
"
Floor is open.
12. Push 2 Talk