Setting Up Screen Call; Activating Screen Call - Sanyo SCP-4920 User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded
annoucement, either one that is pre-recorded or one that you record.
You can also record the caller's message into the Call Memo list.
To listen to the message, see "Reviewing Voice Recordings" on
page xx.

Activating Screen Call

To start Screen Call when you have incoming calls:
1. When the phone rings or vibrates, press Options (right softkey)
to display the options.
2. Highlight Screen Call and press
To set Auto Screen Call:
1.
Press
2. Select Voice Services and press
3. Select Screen Call and press
4. Select Auto and press
5. Select On and press
6.
Set the answering time by using numeric keys or by pressing the
navigation key up or down.
7.
Press
standby display.)
Tip:
If a new caller's message is waiting,
recorded while activating "Screen Call" are shown with "
√
Call Memo list ("
Tip:
While the caller's message is being recorded: Pressing
and disconnects the call, pressing
to access the main menu.
.
or OK (left softkey). (The
": once played, "
!
.
.
.
.
icon is displayed on the
appears on the display. The memos
": not played yet).
answers the call.
√
" or " " icon in the
!
stops recording
96