Erasing Voice Memos; Setting Up Screen Call; Activating Screen Call - Sanyo Sprint SCP-7000 Operating Manual

Erasing Voice Memos

To erase an individual voice memo:
1. Press MENU/OK to access the main menu.
2. Select Voice Services and press MENU/OK.
3. Select Voice Memo and press MENU/OK.
4. Select Play or Play:Speaker and press MENU/OK.
5. Display the memo list, highlight the memo you want to erase, and press Options (right
softkey).
6. Select Erase and press MENU/OK.
7. Select Yes and press MENU/OK.
To erase all voice memos:
1. Follow steps 1-3 above.
2. Select Erase All and press MENU/OK.
3. Select Yes and press MENU/OK.

Setting Up Screen Call

This feature enables you to screen incoming calls by using recorded announcements either one
that is pre-recorded or one that you record. You can also record the caller's message into the
Voice Memo list. To listen to the message, see "Reviewing Voice Memos" on the previous page.

Activating Screen Call

To start Screen Call when you have incoming calls:
1. Press Options (right softkey) to display the options.
2. Select Screen Call and press MENU/OK.
To set Auto Screen Call:
1. Press MENU/OK to access the main menu.
2. Select Voice Services and press MENU/OK.
3. Select Screen Call and press MENU/OK.
4. Select Auto and press MENU/OK.
5. Select On and press MENU/OK.
6. Set the answering time by using numeric keys or by pressing the navigation key up or
down.
7. Press MENU/OK or OK (left softkey).
54