Table of Contents
Advertisement
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is pre-recorded or one
that you have recorded. You can also record the caller's message
into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1. Select
2. Set the answer delay by using numeric keys or by pressing the
navigation key up or down.
3. Press
or OK (left softkey). The
Standby display.
Tip:
While the caller's message is being recorded, press
the call, or press
Selecting an Announcement for Screen Call
1. Select
2. Depending on your preference, select Pre-Recorded or Custom.
Recording Name for a Pre-Recorded
Announcement
1. Follow the step 1 above.
2. Highlight Pre-Recorded and press Edit (right softkey) >
Record Name.
Note:
If your name has already been recorded, you will be asked
whether you want to overwrite it or not. Select
cancel.
3. Press
to start the 1st recording. (The maximum recording
time is 12 seconds.)
> Tools > Voice Services > Screen Call > Auto > On.
to stop recording and disconnect the call.
> Tools > Voice Services > Screen Call > Announcement.
icon is displayed on the
Yes
to overwrite or
9. Voice Services
to answer
No
to
73
Advertisement
Table of Contents
