System Speed Dialing; Timed Reminder; Trunk Queuing - Outgoing - NEC Univerge SV8300 User Manual

1.

System Speed Dialing

This feature provides all users the ability to dial
frequently-called numbers using an abbreviated call
code.
1. Lift the handset and receive dial tone.
2. Dial the System Speed Dialing feature access
code.
3. Dial the abbreviated call code (2 or 3 digits).
4. Converse when the party answers.

Timed Reminder

This feature allows the system to be programmed to
automatically call stations at specified times. Upon
answering, the station is connected to a recorded
announcement or music source.
To set Timed Reminder:
1. Go off-hook and receive dial tone from the
primary extension.
2. Dial the Timed Reminder feature access code and
receive feature dial tone.
3. Dial the desired reminder time in military format.
4. Receive service set tone.
5. Restore the handset.
To cancel Timed Reminder:
1. Go off-hook and receive dial tone.
2. Dial the Timed Reminder cancellation code.
3. Receive service set tone.
4. Restore the handset.

Trunk Queuing - Outgoing

This allows a station user, upon encountering a busy
signal on a trunk, to dial a feature access code and
enter a first-in, first-out queue. As soon as an outgoing
trunk becomes available, stations in the queue will be
called back on a first-in, first-out basis.
When Least Cost Routing is not provided:
1. Dial the trunk access code and receive busy tone.
2. Press the FLASH key (or momentarily press hook
switch) and receive feature dial tone.
3. Dial the Trunk Queuing-Outgoing feature access
code and receive service set tone.
4. Replace the handset.
5. When a trunk becomes idle, the station is
recalled.
When Least Cost Routing is provided:
1. Dial the trunk access code and receive PBX dial
tone.
2. Dial the desired number and receive busy tone.
3. Press the FLASH key (or momentarily press hook
switch) and receive feature dial tone.
4. Dial the Trunk Queuing-Outgoing feature access
code and receive service set tone.
5. Replace the handset.
6. When the trunk becomes idle, the station is
recalled. Once connected to the trunk, the system
automatically redials the number.
26