Split Call Forwarding - No Answer - NEC Univerge SV8300 User Manual

1.
Split Call Forwarding – No Answer
This feature allows internal and external calls, to
extensions that do not answer, to be rerouted to
separate destinations individually. And according
to the type of a caller (Station/C.O. Line/Tie Line)
or a call terminated from internal office or via
CCIS, Call Forwarding or Split Call Forwarding
can be selected.
To activate Split Call Forwarding, both Split Call
Forwarding and Call Forwarding settings are
required. For Call Forwarding settings, refer to the
description of Call Forwarding – No Answer on
page 10.
To set Split Call Forwarding - No Answer:
1. Lift the handset and receive dial tone.
2. Dial the Split Call Forwarding - No Answer feature
access code and receive feature dial tone.
3. Dial desired destination number (0~9) and receive
service set tone.
Number Destination
Number
Target station for Split Call Forwarding – No
0
Answer (Block 0)
Target station for Split Call Forwarding – No
1
Answer (Block 1)
Target station for Split Call Forwarding – No
2
Answer (Block 2)
Target station for Split Call Forwarding – No
3
Answer (Block 3)
Target station for Split Call Forwarding – No
4
Answer (Block 4)
Target station for Split Call Forwarding – No
5
Answer (Block 5)
Target station for Split Call Forwarding – No
6
Answer (Block 6)
Target station for Split Call Forwarding – No
7
Answer (Block 7)
Target station for Call Forwarding – No
8
Answer
9 Station Speed Dialing
4. Replace the handset.
To monitor Split Call Forwarding - No Answer:
1. Lift the handset.
2. When Split Call Forwarding - No Answer has
been set, special dial tone is heard if set by
system programming.
3. Replace the handset.
13
Destination