Internal Zone Paging With Meet-Me; Last Number Redial; Message Reminder - NEC Univerge SV8300 User Manual

1.

Internal Zone Paging with Meet-Me

This feature allows station users to page over the
built-in speakers of the Multiline Terminals within the
assigned zone or all zones.
1. Lift the handset and receive extension dial tone.
2. Dial the Internal Zone Paging feature access code
for the desired zone/all zones.
3. Page the desired party.

Last Number Redial

This feature allows users to redial the last station-to-
station or outside number they dialed using a feature
access key or a feature access code. This is useful
when the called station is busy or does not answer.
To redial the last number:
1. Go off-hook and receive dial tone.
2. Dial the Last Number Redial feature access code.
3. The system will redial the last number dialed from
that station.

Message Reminder

This feature allows a user or Attendant to turn on the
message waiting (MW) lamp of a Single Line
Telephone, or the Message Reminder (MSG) LED of a
Multiline Terminal (if assigned).
To set Message Reminder from a Single Line
Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Message Reminder set access code.
3. Dial the desired station number and receive
feature dial tone.
4. The MSG LED on the dialed Multiline Terminal or
MW lamp on the dialed Single Line Telephone
lights.
To clear the message indication without calling
the station that set the message, from a Single
Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Message Reminder search access code.
3. Dial 3. The message indication is cleared.
4. Restore the handset.
5. If more than one message has been set, repeat
the above procedure as required.
To cancel a message from the station that set it:
1. Lift the handset and receive dial tone.
2. Dial the Message Reminder cancel code.
3. Dial the desired station number and receive
feature dial tone. The message is cleared at the
dialed station.
4. Restore the handset.
22