3onedata NP316Series User Manual page 8

Start" → "all
I. "Start Start
II. Input default IP address of the device "Telnet:
of device by telnet. Choose the menu by "↑, ↓, ←, →" of the keyboard and quit by "ESC
key.
Knock "OK OK". Set the IP of device by telnet. Choose the menu by "↑, ↓, ←, → "of the OK
III.
keyboard and quit by "ESC
Change the IP of the device.
IV. Change the IP (the changed IP must be in the subnet of the PC). then Knock "Esc
programs" → "Running
all programs
all programs
ESC
ESC" key
.
Running
Running"
Telnet: 192.168.1.233". Click "OK 192.168.1.233
Telnet: 192.168.1.233
Server
Choose the "Server Server" menu and Knock "Enter
Page 8 of 12
NP308 series User Manual
OK", setting the IP OK
ESC" ESC
Enter
Enter" key,
Esc" key, quit the network Esc