3onedata NP316Series User Manual page 11

1. Input the IP address of the device
2. Input the NO. of the port of the device(input 1~16)
3. Input 300
4. Default the parameter
IV. Knock "OK OK OK", Knock "Save
V. The
virtual serial port
device.
8. 8. 8.
NP316 series can be used to connect different devices for remote management, each serial port
operates independently to provide maximum versatility, each port can be operate in Driver,
TCP Server, and TCP Client mode independently.
Pay attention attention to to to the the
Pay attention Pay the questions
(1) Make sure the power supply input is AC/DC 220V；
(2) Use the cross-over cable if the devices connect to the PC.
(3) Use the straight-through cable if the devices connect to the HUB.
Note: Note: Cable Note: Cable Cable (blue) (blue) with (blue)
Save Save". Then you can use the created the COM5.
COM5 can communicate with the terminal on the NO.1 port of the
questions as as as below questions below
below：
with the with the product the product is is is a a a straight-through product straight-through straight-through cable.
Page 11 of 12
NP308 series User Manual
Application Application Application
cable. cable.