V" Type Belt Driving System/Kick Starter Arm/ Starter Clutch; Left Crankcase Cover - SANYANG INDUSTRY CO. SYM Service Manual

SYM 8. V-BELT DRIVING SYSTEM/KICK STARTER ARM/STARTER CLUTCH
air cleaner lock bolts

LEFT CRANKCASE COVER

Left crankcase cover removal
Remove air cleaner. (2 bolts)
Remove kick starter arm. (1 bolt)
Loosen vent strap on the front-left side of
cover, and then remove the vent.
Remove engine left-side cover (8 bolts).
Screws¡ Á 6
KICK STARTER ARM
Disassembly
Remove left side cover plate on the left
crankcase cover(screws¡ Á 6).
Remove left side cover plate gasket.
First put kick starter pedal into the starter
shaft. After a little rotation, remove the drive
gear and washer.
Removed kick starter pedal, starter shaft,
return spring and the thrust washer.
Friction spring Starter shaft
Check if starter shaft, drive gear, bushing, for
wear or damage. Replace it with new one if
return spring
necessary.
Check the return spring for spring force or
damaged. Replace it with new one if poor
parts found.
drive gear
8-3