Starting Circuit; Starter Magnetic Switch Inspection; Remove The Luggage Box; Starting System - SANYANG INDUSTRY CO. SYM Service Manual

16. ELECTRICAL EQUIPMENT SYM

STARTING SYSTEM

Starting Circuit

Starter magnetic switch inspection

Starter magnetic switch
Turn main switch to "on", and operate the
brake lever. Then press starting button to
check if there a click sound. It is normal if
there is a click sound.

Remove the luggage box.

Disconnect the battery negative (-) terminal.
Remove the battery positive (+) connection
Starter magnetic switch
and starting motor wires from the starter
magnetic switch large pin.
Remove the power control connector of the
Starter magnetic switch.
Connect a Ohmmeter between the Starter
magnetic switch large pins.
Connect the green/yellow wire to battery
positive (+) terminal, and yellow/red to
battery negative (-) terminal.
Check the continuity between the Starter
magnetic switch large pins. If it is not
continuity, then replace the starter magnetic
switch.
16-14