SANYANG INDUSTRY CO. SYM Service Manual page 146

14. STEERING/FRONT WHEEL/FRONT SHOCK ABSORBER SYM
Align the flange part on the speedometer
gear with the slot of wheel hub, and then
install the brake disc (drum brake) or
speedometer gear box.
Caution
Contaminated brake lining will reduce
brake performance so the brake lining,
brake drum and disc must be free of
grease.
Stopper
Place the front wheel between the front
shock absorbers.
Disc Brake
Align the flange part on the speedometer
gear with the slot of shock absorber stopper.
Disc Brake
Gear box flange part
Brake panel slot
Install the front wheel axle from right shock
absorber side.
Install the wheel axle nut, and tighten it to
specified torque value.
Torque value: 11.0~13.0kgf-m
Connect the speedometer cable to the
speedometer gear box.
Wheel axle nut Speedometer cable
14-8