Steering System; Suspension System; Front Shock Absorber; Rear Shock Absorber - SANYANG INDUSTRY CO. SYM Service Manual

2. MAINTENANCE INFORMATION

STEERING SYSTEM

Caution
Check all wires and cables if they are
interfered with the rotation of steering
handle bar.
Lift the front wheel out of ground.
Turn handle from right to left and check if
turning is smoothly.
If handle turning is uneven and bending, or
the handle can be operated in vertical
direction, then adjust the handle top bearing.

SUSPENSION SYSTEM

Warning
Do not ride the motorcycle with poor
shock absorber.
Looseness, wear or damage shock
absorber will make poor stability and
drivability.

Front shock absorber

Hold front brake lever and press down the
front shock absorber for several times to
check its operation.
Hold front brake lever and push forward the
front shock absorber for several times to
check its locking status.
Check if it is scratched or leaking.
Replace damaged and non-repairable
components.
Tighten all nuts and bolts.

Rear Shock absorber

Press down the rear shock absorber for
several times to check its operation.
Check if it is scratched or leaking.
Replace damaged and non-repairable
components.
Park the motorcycle with main stand.
Start engine and let the rear wheel rotate
after increased engine rpm. Check engine
for any parts loose or shaking. Also check
the engine suspension bushing for wear out.
Replace the bushing if worn out.
Tighten all nuts and bolts.
2-10
SYM