IBM CISCO R2E2 User Manual page 59

Variable
site
IBM Tivoli Netcool/Proviso Cisco IP Telephony 2.4.0.0 Technology Pack
Description
A variable assigned to the JavaScript object Site. A Site object defines a set of
properties specific for a site, business department, location, remote office, or group of
people. You can define multiple Site objects. Objects are distinguished through the site
name you pass to the object.
Create a Site object as follows:
site = new Site("MySite");
In the example, MySite is the site name.
A site object contains the following methods:
• addLocalCallPrefix(string prefix)
The prefix argument specifies n digits in a local call prefix, where n is the prefix
length. If the first n digits in a phone number match the prefix, the phone number is
determined to be a local number. Many local call prefixes can be defined for the same
site through this method.
Example: site.addLocalCallPrefix("999");
• addExtensionRange(int startNumber, int endNumber)
The two arguments specify the extension range for a site, beginning with the first
extension in the range, and ending with the last extension.
Each number within the range is an internal extension for the named site. Many
extension ranges can be defined for the site through this method. The values allow
automatic grouping, report navigation by site, and path subelement definition.
Example: site.addExtensionRange(1000,1830);
• addVoiceMailRange(int startNumber, int endNumber)
The two arguments specify the VoiceMail extension range for a site, beginning with
the first VoiceMail extension in the range, and ending with the last extension.
Each number within the range is an internal VoiceMail extension for the named site.
Many VoiceMail extension ranges can be defined for the site through this method.
The values allow automatic grouping, report navigation by site, and specific reports
on the VoiceMail application.
Example: site.addVoiceMailRange(9000,9050);
• addPstnGatewayIpAddress(string ipAddress)
The argument specifies the IP address of a PSTN gateway. Many PSTN gateway
addresses can be defined for the named site through this method. The values allow
automatic grouping, report navigation by site, and path and gateway subelement
definition.
Example: site.addPstnGatewayIpAddress("10.1.184.20");
Use the following method only in the CUCMConfig.js file.
Note:
• addCucmAddress(string ipAddress)
The argument specifies the IP address of a CUCM server in the cluster.
Example: site.addCucmAddress("10.1.6.8");
If you are collecting Perfmon data on multiple hosts, ensure that
Note:
you specify all of the Perfmon hosts in the CUCMConfig.js file, by
adding more addCucmAddress lines to the appropriate cluster sections.
Chapter 4: Configuring the technology pack
55