System - ESP DVR8iP User Manual

DVR8iP Manual_Layout 2 30/01/2013 14:42 Page 9
Once you have entered the selections above click Add, data applicable to the selections
will now appear in the main screen. Further more precise selections can then be made
by clicking on the boxes to the left of the file details or selecting all files by clicking on
the box next to Channel. Once your file choices have been made the required free data
capacity and total capacity will be displayed at the bottom of the screen.
Clicking start will commence the back up operation and replace the capacity
requirement with information on the estimated time to complete the process.

System

The system sections allows configuration of much of the general functionality of the DVR.
General
Encode
Network
Net service
GUI Display
PTZ Config
RS232
Tour
ADVANCED
HDD Manage
Account
Online user
Setting time and date, Language and machine identification details.
Each channel can be configured for recording resolution, frame rate and
picture quality. High resolution with high frame rates at high quality
will create the highest amount of data (Bit rate) and therefore fill up
the hard drive at the quickest rate.
The DVR output can be viewed locally around a network (LAN) or
remotely via the internet. Settings can be entered using a fixed or
DHCP IP address. Details of the correct data to enter can be provided by
your internet service provider or IT support.
Settings can be made for network communication via PPPOE, NTP and
SMTP for e-mail alerts. Specific setting requirements can be provided
by your internet service provider or IT support. Includes opportunity to
enter forwarded Port number for mobile device viewing and set up for a
wireless (WIFI) connection of your DVR to your router if a wired
connection is not possible.
Note: A wireless USB adaptor is needed if WIFI connection to your
router is required. The adaptor must have a Ralink RT3070 board
included, our wireless USB adaptor DVRWLA is compatible.'
Settings for how the on-screen information is displayed.
Settings and configuration of control of Pan and Tilt zoom cameras.
Settings for the Hard drive.
Configuration of users and their level of access. Individual users can be
arranged in groups and have their access to functions within the DVR
controlled.
Information with regard to online users is displayed and can be
disconnected if required.
9