Playing Back A Recording; Transferring A Recording To Usb - ESP DVR8iP User Manual

DVR8iP Manual_Layout 2 30/01/2013 14:42 Page 8

PLAYING BACK A RECORDING

To view recorded data right click anywhere on screen and enter playback directly from
the menu. The playback screen can also be found in the main menu shortcuts record >
Playback.
To play back recorded material left click on search and enter the following data.
File Type
Read/Write
Channel
Start Time
End Time
Play mode
When complete left click play. You can then simply use the icons at the foot of the
screen to control playback of the whole selected period or choose specific start times
from within the selected period via the list of start times on the right hand side of the
screen.
Digital Zoom During playback it is possible to carry out a digital zoom. Left click and
To exit the playback area right click and select > Up Window.

TRANSFERRING A RECORDING TO USB

Recorded data can be easily transferred using the supplied 2GB USB stick drive. The
amount of data that can be stored is only limited by the capacity of the USB drive.
Larger capacity drives are available .
To create an archive of data insert the USB stick drive into a spare USB port.
Once a USB stick is present go to the main menu click record then backup.
If the USB stick is not visible on the back up screen click detect. The DVR will then
display the details of the stick and its available capacity. If this is the USB stick you wish
to use select it by clicking on the left hand box next to the stick description.
Now click backup. On this section you will select the data that you wish to backup to
the selected USB stick.
Type
Channel
Start Time
End Time
8
Do you wish to search for all recorded material or recordings made from
specific triggers such as alarm or motion detection events.
Do you wish to source the data from the main hard drive or previously
backed up material on external storage such as a USB stick.
Highlight all channels that you wish to source the data from.
Enter the time and date from which you wish the search to start.
Enter the time and date at which you wish the search to finish.
Choose here the level of data decode.
hold anywhere in the picture then move the mouse in any direction to
create a selection window. Once you are happy with the selection
window release the left click and then left click again within the created
window to zoom in. To return to the original screen simply double click.
Do you wish to back up all recorded material or recordings made from
specific triggers such as alarm or motion detection events.
Select the channels that you wish to back up.
Select the start date and time of the desired back up.
Select the end date and time of the desired back up.