Cisco 7905 Quick Reference Manual page 5

Use the To activate the Monitor:
Monitor?
To switch from the Monitor to the
handset:
To turn off the Monitor and hang up:
To adjust the Monitor volume:
Operate the To control the cursor:
LCD Screen?
To select a menu item:
Adjust the
LCD
Contrast?
Document located within technology services on NTU.ac.uk
- 5 -
• During a call press the Monitor soft
key and hang up the handset. (You will
be able to hear the call, but you will
not be able to talk on the call.)
• Pick up the handset
•
• Press the EndCall soft key.
• Press the up or down Volume button
when the Monitor is in use.
• Press the Save soft key to save your
change.
• Press the >> soft key to re-position
the cursor.
• Press the << soft key to delete a
character or digit in an entry.
• Press the Navigation button to select
(highlight) a menu item. Then press
the Select soft key.
OR
• Press the number key on your
phone's dial pad that corresponds to
the item number in the menu.
• Press the Menu button.
• Select Settings from the menu.
• Select User Preferences (7911 only)
• Select Contrast from the menu.
• Press the Up or Down soft keys to set
the desired contrast.
• Press the Ok soft key to accept your
changes.
You can use the
monitor to listen to a
call. To talk on a call,
you must pick up the
handset.
Operating your phone's
LCD screen is easy.
Use the Navigation
button, soft keys, and
the keypad to make
your selections.
Tip: To exit out of a
menu on your phone's
LCD screen, press the
Exit soft key.