Advertisement
1.
Plug the 120 V~ device(s) you
wish to power into the 3-prong AC
Receptacles. See FRONT above.
The appliance(s) must not use
more than 400 (total) watts during
continuous operation, otherwise it
may overload the Inverter.
Caution: Some rechargeable appli-
ances may damage the Power
Inverter or the appliance. When first using a rechargeable device, check the
inverter's temperature for the first 10 minutes. If it becomes abnormally hot,
do not use this device with the Inverter.
2.
Flip the Power Switch to the On (I) position to turn on. Do not use the appli-
ance until the green power LED indicator is on.
3.
Turn on appliance. If an alarm sound is heard, turn off the appliance.
Caution: It is recommended that the vehicle be started every hour to recharge
the battery. Doing this will help prevent any unexpected shutdown of the
equipment. This will also help ensure that there will be enough battery power
to start the vehicle. due to the risk of carbon monoxide inhalation (see
Warning # 23 on page 4), do not run the vehicle's engine within an en-
closed area.
4.
After use, disconnect the appliances, flip the Power Switch to the Off (O)
position.
1.
Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth; never clean this unit with water or
harsh cleaners.
2.
Aside from the fuses, this device does not contain any user replaceable parts.
If it needs service, take it to a qualified technician.
3.
If the fuses need replacement, simply disconnect the inverter, remove the
fuse cover on the back panel (see Back, page 5), remove the old fuses, and
replace them with another 30 Amp fuses of the same type. Replace the fuse
covers and reconnect the inverter before use.
For technical questions, please call 1-800-444-3353.
SKU 92708
oPeraTIoN
MaINTeNaNce
reV 07i
Page 6
Advertisement
