Chicago Electric 91813 Instructions

Safety Precautions and Instructions

Modified Sinewave Type; 12 VDC Input;
120 V~, 100 (Peak) /60 (Cont.) W Nominal Output;
Operating Temp. Range: 14°-113° F
TO PReVeNT SeRIOuS INjuRy, ReaD aND uNDeRSTaND all
WaRNINgS aND INSTRuCTIONS beFORe uSe.
Copyright 2004 by Harbor Freight Tools
©
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions please call 1-800-444-3353.
1. Wear aNSI approved safety goggles when replacing fuse.
2. Keep children away from this Inverter.
this product.
3. Do not use this item in rain, on a boat, or any other wet area.
to direct sunlight or heat.
4. Delicate device, handle with care.
5. Replace the fuse in this item
fuse with a higher rated fuse or another object is very dangerous and can result in
fire, serious personal injury, or death.
6. before every use, check for any broken parts or mounting fixtures, and any
other condition that may affect proper operation. Any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function.
7. Do not disassemble. aside from the fuse, this item has no replaceable parts.
If this product is damaged and/or does not function properly with an unbroken fuse,
the entire unit must be replaced.
8. Do not overload this device.
120 Volts AC only. Check the wattage of any device before using this item to power
it. Some rechargeable devices may damage the Power Inverter or the device. When
first using a rechargeable device, check its temperature for the first 10 minutes. If
Plug-in Power Inverter
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
SaVe ThIS INSTRuCTION SheeT.
91813
. All rights reserved. No portion of this manual or any
®
WaRNINg
Do not allow them to play with or around
Do not drop or strike this item.
ONly with another 10 amp fuse. Replacing the
This device is designed for loads up to 60 Watts at
.
®
Do not expose
ReV 09b