Advertisement
Table of Contents
- 1 Important Safety Information
- 2 General Safety Warnings
- 3 Specific Safety Rules
- 4 Grounded Tools: Tools with Three Prong Plugs
- 5 Double Insulated Tools: Tools with Two Prong Plugs
- 6 Extension Cords
- 7 Specifications
- 8 Installation
- 9 Maintenance and Servicing
- 10 Troubleshooting
- 11 Please Read the Following Carefully
- 12 Assembly Diagram
- 13 Limited 1 Year / 90 Day Warranty
- Download this manual
5000W Continuous/10,000W
surge PoWer inverter
set uP and oPerating instruCtions
visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
save this manual.
©
Copyright
2007 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
revised manual 07i, 08f, 09d, 09l
96706
®
. All rights reserved. No portion of this manual or any artwork
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Electric Power Systems 96706
Summary of Contents for Chicago Electric Power Systems 96706
- Page 1 5000W Continuous/10,000W surge PoWer inverter 96706 set uP and oPerating instruCtions visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury. save this manual. © ® Copyright 2007 by Harbor Freight Tools .
-
Page 2: Important Safety Information
Avoid body contact with earthed or hazardous situation which, if grounded surfaces such as pipes, not avoided, could result in radiators, ranges and refrigerators. minor or moderate injury. SKU 96706 For technical questions, please call 1-800-444-3353. Page 2... -
Page 3: Specific Safety Rules
Such preventive safety measures Inverter. reduce the risk of starting the Inverter accidentally. Do not leave the Inverter unattended when it is plugged into an electrical SKU 96706 For technical questions, please call 1-800-444-3353. Page 3... - Page 4 Check the temperature of the device product, but must be supplied by the several times when it is charging. If operator. the device becomes extremely hot; turn the power off, remove the de- save these SKU 96706 For technical questions, please call 1-800-444-3353. Page 4...
-
Page 5: Grounded Tools: Tools With Three Prong Plugs
Underwriters Labora- plug must be connected to a properly tories, Inc., the Canadian Standard grounded outlet. If the tool should Association, and the National Electri- electrically malfunction or break SKU 96706 For technical questions, please call 1-800-444-3353. Page 5... -
Page 6: Extension Cords
No Load Revolutions per Minute outdoors, make sure it is marked with n 0 xxxx/min. (RPM) the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. SKU 96706 For technical questions, please call 1-800-444-3353. Page 6... -
Page 7: Specifications
Caution! This Inverter must only be perature reaches 149° F. connected to batteries with a output rev 09b SKU 96706 For technical questions, please call 1-800-444-3353. Page 7... - Page 8 Do • Gel and AGM (Absorbed Glass not connect old and new batteries Mat) batteries can be used with this together, wet and gel cells together, rev 09d SKU 96706 For technical questions, please call 1-800-444-3353. Page 8...
- Page 9 ^ Bank Capacity = (single battery capacity) x (# of batteries) 400 ah capacity is for two, 200 ah batteries. b. Connect the batteries in parallel as shown above. Connect all of the positive terminals to one another. rev 09d SKU 96706 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 Some rechargeable tools/appli- ances may damage the Inverter or the device(s). When first using a rechargeable device, check the Inverter’s temperature for the first ten rev 09d SKU 96706 For technical questions, please call 1-800-444-3353. Page 10...
-
Page 11: Maintenance And Servicing
Maintain batteries according to manu- facturer’s instructions. Check electro- lyte level on all batteries after charg- ing and refill as needed. Charge bat- teries according to manufacturer’s recommendations onlY; incorrect rev 07k SKU 96706 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Troubleshooting
ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 96706 For technical questions, please call 1-800-444-3353. Page 12... -
Page 13: Assembly Diagram
Product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Replacement parts are not available for this product. SKU 96706 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Limited 1 Year / 90 Day Warranty
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 96706 For technical questions, please call 1-800-444-3353. Page 14...
Need help?
Do you have a question about the Power Systems 96706 and is the answer not in the manual?
Questions and answers
How to replace the fuses?
The fuses in the Chicago Electric Power Systems 96706 inverter are internal and must be replaced professionally. The manual states that fuse replacement should be performed only by certified and licensed technicians. Users are not advised to replace the fuses themselves.
This answer is automatically generated
Can i use a string of solar pannels with my inverter to generate power on demand durring sunny days... can i use a charge controller between my inverter and my solar pannel string so i can raise my incoming voltage above 12 volts to keep my amprege lower thus smaller gauge wirer... copper is expensive...