Advertisement
Table of Contents
- 1 Important Safety Information
- 2 General Safety Rules
- 3 Specific Safety Rules
- 4 Grounded Tools: Tools with Three Prong Plugs
- 5 Double Insulated Tools: Tools with Two Prong Plugs
- 6 Extension Cords
- 7 Specifications
- 8 Setup Instructions
- 9 Operation
- 10 Maintenance and Servicing
- 11 Troubleshooting
- 12 Limited 90-Day Warranty
- Download this manual
AC/DC power inverter
1,000 wAtt / 2,000 wAtt
Set up AnD operAting inStruCtionS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
read this material before using this product.
Failure to do so can result in serious injury.
SAve tHiS MAnuAl.
Copyright
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
Distributed exclusively by Harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
visit our website at: http://www.harborfreight.com
©
2007 by Harbor Freight Tools
97047
®
. All rights reserved. No portion of
®
.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Chicago Electric Power Systems 97047
Summary of Contents for Chicago Electric Power Systems 97047
- Page 1 AC/DC power inverter 1,000 wAtt / 2,000 wAtt Model 97047 Set up AnD operAting inStruCtionS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. ® Distributed exclusively by Harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011...
-
Page 2: Important Safety Information
Notice Notice related to personal injury. CAution, without the safety alert symbol, CAution CAution is used to address practices not related to personal injury. For technical questions, please call 1-800-444-3353. SKU 97047 Page 2... -
Page 3: General Safety Rules
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. For technical questions, please call 1-800-444-3353. SKU 97047 Page 3... -
Page 4: Specific Safety Rules
Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving. For technical questions, please call 1-800-444-3353. SKU 97047 Page 4... - Page 5 For technical questions, please call 1-800-444-3353. SKU 97047 Page ...
-
Page 6: Grounded Tools: Tools With Three Prong Plugs
As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See table A.) For technical questions, please call 1-800-444-3353. SKU 97047 Page ... - Page 7 * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. Symbology Double Insulated Volts Alternating Current Canadian Standards Association Amperes No Load Revolutions per Minute n 0 xxxx/min. Underwriters Laboratories, Inc. (RPM) For technical questions, please call 1-800-444-3353. SKU 97047 Page 7...
-
Page 8: Specifications
For the power inverter to work properly, your power source must provide 12 volts DC, and the power source must provide enough current (i.e., 4 amps to oper- ate the load of 0 Watts or under). For technical questions, please call 1-800-444-3353. SKU 97047 Page 8... -
Page 9: Operation
Plug the 11 VAC device(s) you wish to power into the 3-prong AC Receptacles. See illustration on the next page. The appliance(s) must not use more than 1,000 (total) watts during continuous operation, otherwise it may overload the Inverter. For technical questions, please call 1-800-444-3353. SKU 97047 Page 9... -
Page 10: Maintenance And Servicing
Damaged equipment can fail, causing serious personal injury. Do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use. For technical questions, please call 1-800-444-3353. SKU 97047 Page 10... -
Page 11: Troubleshooting
Your devices may draw too much power to operate them. The inverter may be in thermal shutdown. Let it cool down and make sure there is adequate ventilation around the unit. For technical questions, please call 1-800-444-3353. SKU 97047 Page 11... - Page 12 AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. ASSeMBlY DiAgrAM For technical questions, please call 1-800-444-3353. SKU 97047 Page 12...
-
Page 13: Limited 90-Day Warranty
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 97047 Page 13...
Need help?
Do you have a question about the Power Systems 97047 and is the answer not in the manual?
Questions and answers