Advertisement
Continuous Power
Peak Power
Input Voltage
Output Voltage
AC Receptacles
Fuse
Indicators
Switch
Operating Temperature
Battery Cables
Features
Note: Performance of this unit may vary depending on the available battery
power or appliance wattage.
You will need the manual for the safety warnings and precautions, assem-
bly instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep the manual and invoice in a safe and dry place for future refer-
ence.
SaFeTy warNINgS aNd PrecauTIoNS
WARNING: When using this device, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
read all instructions before using this product!
1.
do not
plug a battery charger into the inverter if the charger has a warning
that dangerous voltages are present at the battery terminals.
2.
keep work area clean.
keep inverter away from any direct heat source or combustible material.
3.
4.
observe work area conditions
in damp or wet locations. Don't expose to rain. Keep work area well lit. Do
not use electrically powered products in the presence of flammable gases or
liquids.
5.
keep children away
not let them handle machines, equipment, or extension cords.
For technical questions, please call 1-800-444-3353.
SKU 92708
SPecIFIcaTIoNS
400 Watts
800 Watts
12 VDC Nominal (11-15 V possible)
120 V~ / 60 Hz
(2) Two 3-Prong, Polarized Outlets
30 Amps x 2
Green LED = power on
Rocker type, On / Off
14-113° F
9 AWG, 2' (approximately)
- Modified sine wave with overload protection
- Low voltage alarm
at 11 V;
1
Save This Manual
Cluttered areas invite injuries.
. Do not use machines or powered products
. Children must never be allowed in the work area. Do
and shutdown
1
at about 10 V
2
2
reV 05d; 07i
Page 2
Advertisement
