Editing - JVC HR-S6955EK Instructions Manual

Editing

L-1 OUTPUT Setting
The connector delivers either a composite signal (regular video
L-1 IN/OUT
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-1 OUTPUT
unit connected to the rear panel
get to the output/input set screen Press m. Move the highlight bar to
OUTPUT/INPUT SET using the A and B buttons and press
select mode Move the highlight bar to
using the A and B buttons.
OUTPUT
Press (or E) to select the desired mode:
FOR L-1 OUTPUT
• : If a connected device's input is
VIDEO
compatible only with regular
video signals, set to
• : If a connected device's input is
S-VIDEO
compatible with Y/C signals, set to
. This setting will let you take advantage of higher-quality
S-VIDEO
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen Press m.
advanced features
to the appropriate mode depending on the type of
connector of this VCR.
L-1 IN/OUT
L-1
.
VIDEO
(or E).
OUTPUT/INPUT SET
F L-1 OUTPUT VIDEO
L-2 INPUT VIDEO
[1] a k
[MENU]: EXIT
37