JVC HR-S6955EK Instructions Manual page 25

PROG
1
9
4
TV
– –:– –
TV/VCR AUDIO
1 2 3
2
4
5 6
VPS/PDC DAILY/QTDN. WEEKLY/HEBDO
7 8 9
0000 AUX 4
0
START STOP
DATE PR
DEBUT FIN
EXPRESS
? 30 SEC
1 PROG
satellite receiver users To timer-record a satellite broadcast using Express
Timer Programming:
• Set the satellite receiver to the appropriate channel before the selected
programme begins.
• Leave the satellite receiver's power on.
For memory capacity and Serial Programming, see
ming on page 21.
Return to Normal Screen
Press p or
about 5 seconds, then the normal TV screen appears.
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing c otherwise no
recording will take place. c will appear on the display panel. To disengage the
Timer Mode, press c again.
If a video tape with the safety tab removed is loaded, c, Play indicator (,) and
Record indicator (U) will flash. Insert another tape with the safety tab in place to
record!
If no video tape is loaded, c indicator will flash. Insert a tape to record!
If the tape reaches its end during timer recording, the recording stops and "c",
"U" and "," on the display panel blink. Press c to disengage timer, then press
STOP/EJECT STOP/EJECT
STOP/EJECT STOP/EJECT ( S/0)on the VCR to eject the tape or press o then press REW STOP/EJECT
(1) to rewind the tape.
.
PROGRAM COMPLETED
basic features
VIDEO Plus+ Timer Program-
appears on the TV screen for
25
REW REW
REW REW