Editing Using Another Vcr - JVC HR-S6955EK Instructions Manual

Editing Using Another VCR

connect up Connect the player's 21-pin SCART connector to the recorder's
21-pin SCART connector as illustrated.
A
When using your VCR as the player ...
... connect its L-1 IN/OUT
B
When using your VCR as the recorder ...
... connect its
L-2 IN/DECODER
set vcr's input mode The recording VCR mode must be set to
VCR is the recorder, press
connector) or
OUT L-2
VCR is the player, set
O.S.D.
set edit mode See Picture Control on page 31.
start source vcr Engage its
start recording vcr Engage its
NOTES:
• All necessary cables can be obtained from your dealer.
• For Y/C signal input/output, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.
• When you set
PICTURE CONTROL
select (or
AUTO NORM
tapes.
connector to another VCR.
or connector to another VCR.
L-1 IN/OUT
and/or to select
AUX PR
(if you've used the
L-2 IN/DECODER
to . ( pg. 42)
OFF
mode.
PLAY
mode.
RECORD
to to dub tapes (
EDIT
when is set to
B.E.S.T.
advanced features
AUX
(if you've used the
L-1
connector). If this
pg. 31), be sure to
) after you finish dubbing the
OFF
39
. If this
L-1 IN/