Tuner Set; Auto Channel Setup - JVC HR-S6955EK Instructions Manual

Tuner Set

The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the PR + or - buttons enables you to jump
to the available channels without going via any vacant channels. This channel search can be
done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup has failed to identify and record available channels or
you have moved to a new area.

Auto Channel Setup

get to the main menu Press m.
perform auto channel set Move the highlight bar to
using the A and B buttons and press
SET
rf and scart connection If you have chosen to connect the
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
AUTO SET
there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the S mark on the screen moves
from left to right.
AUTO SET
PLEASE WAIT
[MENU]:EXIT
its search, the confirmation screen will appear showing the details
( = Preset Number,
PR CH
Name) of the TV stations that the process has found. The first
station will have a highlight bar over it and will be blinking. This
screen and the programme currently being broadcast on the
selected station will alternate at 8 second intervals. To view the
next channel, press the A and B buttons to move the
highlight bar to the required channel.
return to normal screen Press m.
NOTES ON CHANNEL RECEPTION
incorrect station id In certain reception conditions, station names may not be stored
correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide
Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel
being recorded.
poor reception The VCR memorises all stations found regardless of their quality. If a station's
quality is poor, you can delete that station from the memory (see page 49).
screen will appear on the TV and remains
The caption
SCAN COMPLETED
about 5 seconds.
confirmation screen Once
Auto Channel Set has completed
= Channel Number and
advanced features
AUTO CH
(or E).
appears at the end of the process for
= Station
ID
MAIN MENU
MODE SET
F AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[1] a k
[MENU]: EXIT
PR CH ID PR CH ID
01 26 BBC1 08 - - - -
02 33 BBC2 09 - - - -
03 23 ITV 10 - - - -
04 30 CH4 11 - - - -
05 37 CH5 12 - - - -
06 - - - - 13 - - - -
07 - - - - 14 - - - -
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
47