Clock Set; Setting The Clock - JVC HR-S6955EK Instructions Manual

Clock Set

You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup.
• The VCR's memory backup has expired
• You want to change the Just Clock setting

Setting the Clock

get to the initial set screen Press m. Move the highlight bar to
A and B buttons and press
get to the clock set screen Move the highlight bar to
B buttons and press
set time and date When the
time will be blinking. Use the A and B buttons to set the
correct time (pressing and holding will advance the time in
30 minute increments) and then press
will blink. Use the A and B buttons to set the correct
date (pressing and holding will advance the date in 15 day incre-
ments) and then press
same way and press
set just clock Set as desired using the A and B
buttons then press
set preset for clock data source If you have set
specify a preset (station) for
buttons to select the preset and press
start clock operation Press m.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on.
• when the VCR is in Timer mode.
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
(or E).
(or E).
screen appears, the
CLOCK SET
(or E). The date
(or E). Set the correct year in the
.
(or E).
JUST CLOCK to take its source data from. Use the A and B
(or E).
advanced features
INITIAL SET
using the A and
CLOCK SET
TIME
0: 00
JUST CLOCK : ON
TV PR.
[1] a k
[MENU]: EXIT
to , you will need to
JUST CLOCK ON
53
using the
CLOCK SET
DATE YEAR
01 . 01 02
: 1
, you are
ON