Express Timer Programming - JVC HR-S6955EK Instructions Manual

26 basic features
before you start
Make sure that the
VCR's clock is set
correctly
Insert a cassette with
the safety tab in place
24H Express Timer
Programming
You can program a timer recording that starts within 24 hours using the 24H
EXPRESS c button and the Advanced JOG Dial on the VCR.
enter program mode Press the
c button on the VCR. The
EXPRESS
Programme Start Time indicator starts blinking
on the display panel.
set start time Turn the
or left. One click stop of the
the time in 5-minute intervals.
set stop time Push the centre part of the
. The Programme Stop Time indicator starts
Dial
blinking on the display panel. Turn the
to the right or left.
set preset position Push the centre part of
the JOG Dial . Turn the JOG Dial
left.
• To set the tape speed, press /(SP/LP). The current setting for the tape
speed appears on the display panel for about 5 seconds. Press / (SP/LP)
again to change the setting while tape speed is displayed.
engage timer mode Press the
turns off automatically and c is displayed on the display panel.
• Before pressing the
24H EXPRESS
can cancel the setting at anytime by pressing the centre part of the
more than 3 seconds. Repeat the above steps from setting the start time.
• To disengage the Timer Mode, press c or
Notes
• You can set this VCR to timer record up to eight programmes. If you try to
enter a ninth, appears on the display panel.
FULL
• If appears on the display panel, repeat the above steps again.
Err
• When a menu screen is shown, you cannot use the 24H Express Timer
Programming function. Press
• You can use the 24H Express Timer Programming function also when the
VCR is turned off.
24H
to the right
JOG Dial
JOG Dial changes
JOG
JOG Dial
to the right or
c button on the VCR. The VCR
24H EXPRESS
c button to engage the timer mode, you
24H EXPRESS
to return to normal screen, and try again.
m
S-VHS
VCR
REVIEW
S-VHS
VCR
REVIEW
S-VHS
VCR
REVIEW
S-VHS
VCR
REVIEW
for
JOG Dial
c.