Hv Module Unit, Leaf Sw Unit - Canon PowerShot G3 Service Manual

NOTE (Assembling)
Insert the SI sensor of
the HV MODULE UNIT into the
SLT HOLDER firmly.
(1)-2
Claws
Fig. 3-31 HV MODULE UNIT, LEAF SW UNIT

2.3.5.2 HV MODULE UNIT, LEAF SW UNIT

(1) HV MODULE UNIT
1. Remove the flexible board of the HV MODULE UNIT from the dowel.
2. Remove the four claws, then remove the SLT HOLDER from the SI sensor of the HV MODULE UNIT.
NOTE (Assembling)
Insert the SI sensor of the HV MODULE UNIT into the SLT HOLDER firmly.
(2) LEAF SW UNIT
1. Remove the soldering, then remove the LEAF SW UNIT from the HV MODULE UNIT.
1. Remove the AF LED FPC from the AF LED HOLDER.
HV MODULE UNIT
SLT HOLDER
Flexible board of
the HV MODULE UNIT
SI sensor of
(1)-2
(1)-1
the HV MODULE UNIT
Claws
SLT HOLDER
Dowel
3-31
CHAPTER 3. REPAIR INSTRUCTION
Soldering
(2)-1
LEAF SW
UNIT