Hunter Type 3 Owners And Installation Manual page 16

9 • Completing Your Installation With a Light Fixture (Continued)
9-5. To attach the light kit, connect the upper plug connector from the
motor to the lower plug connector in the light kit.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
9-6. Place the light kit over the light kit top housing. Align the holes
in the light kit top housing with the light kit. Attach the light kit
to the light kit top housing with three housing assembly screws.
Tighten all three screws firmly.
Note: In compliance with U.S. Federal energy regulations, this
ceiling fan contains a wattage saver that restricts the light
kit to a maximum of 190 Watts. Exceeding that limit or
the specifications on the light sockets may result in fire
hazard or improper operation. If lights do not appear to be
operating properly, see the troubleshooting section
16
45066-01 • 03/03/10 • Hunter Fan Company
Housing
Assembly Screw
Steps 9-5 – 9-6
Plug
Connector
Detail
Housing
Assembly Screw
Plug
Connector
Light Kit