Table of Contents
Advertisement
6.8
Inspecting the drive and chain
1.
2.
3.
4.
36
Turn the right-hand pedal arm in an anti-clockwise direction and observe the chainwheels
and the sprocket assembly from above.
·
The chainwheels and sprockets must not have any lateral runout.
·
There must not be any foreign matter in any of the components. Remove any such
foreign matter if it is easy to do so.
Press the left-hand pedal arm towards the chain run in the position shown.
·
You should not feel any bearing play.
·
No cracking or grinding noises should be heard.
Inspect the chain for damage.
The chain must not be damaged at any point, e.g. by bent chain links, protruding chain
link pins, etc. or jammed and immobile chain links.
With the bike at standstill, turn the right-hand pedal lever contrary to the drive direction
and observe the chain run at the derailleur rollers of the rear derailleur.
The chain must run smoothly over the derailleur rollers and must not jump.
GHOST EPAC
Hide quick links:
Advertisement
Table of Contents
