Inspecting The Wheels; Checking The Tightness; Checking The Tyres; 6.1.2.1 Checking The Position Of The Valve - Ghost E-HYBRID TRAIL 9000 Operating Manual

6.1

Inspecting the wheels

6.1.1

Checking the tightness

1.
6.1.2

Checking the tyres

6.1.2.1 Checking the position of the valve

As a result of stresses and strains and low tyre pressure, the tyre and inner tube can move on the rim and
result in incorrect positioning of the valves. The valve base may tear off during the journey and result in a
sudden loss of pressure in the tyre.
1.
1.
Shake both wheels strongly at right angles to the direction of travel.
· The wheels must not move in their mounting.
· The quick-release lever or thru axle must be closed
See section 8.4, Quick-release axles, thru axle.
· No cracking or grinding noises should be heard.
Remove the valve nut.
Check the valve position:
the valves must point in the direction of the centre of the wheel.
Correct valve position:
Incorrect valve position:
E-HYBRIDE TRAIL 9000 LADY / MAN
E-HYBRIDE TRAIL 4000 LADY / MAN
E-HYBRIDE STREET LADY / MAN
27