Types 8303, 8304, And 8312 - IBM 8302 Hardware Maintenance Manual

6. Slide the system board toward the front of the machine and lift out.

Types 8303, 8304, and 8312

To remove the system board, do the following:
1. Turn off the server and peripheral devices and disconnect all external cables
and power cords; then, remove the cover. See "Types 8303, 8304, and 8312" on
page 40
2. Remove the air baffle.
3. Disconnect all wires connected to the system board.
4. Rotate the drive chassis over the system board and lock it in the upright
position.
5. Remove the support arm by pulling it out.
6. Remove the seven screws that attach the system board to the chassis.
7. Lift out the system board.
Chapter 6. FRU Removals
81