IBM 8302 Hardware Maintenance Manual page 57

5. Install the adapter-slot-cover latch.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Types 8305, 8306, 8309, and 8313" on
page 68.
Installing adapters in Types 8307, 8308, 8310, 8311, 8314, and
8315
This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters and one slot
used for an AGP adapter. You can install an adapter up to 228 mm (9 inches) long.
To install an adapter:
1. Remove the cover. See "Types 8307, 8308, 8310, 8311, 8314, and 8315" on page
41.
2. Remove the adapter-slot-cover latch and the slot cover for the appropriate
expansion slot.
3. Remove the adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
Chapter 5. Installing Options
51