IBM 8302 Hardware Maintenance Manual page 74

To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover over the chassis and pivot it down over the computer until it
4. Reconnect the external cables and power cords to the computer. See "Installing
5. To update the configuration, see "Setup Utility program" on page 24.
Types 8305, 8306, 8309, and 8313
After working with options, you need to install any removed parts, replace the
cover, and reconnect any cables, including telephone lines and power cords. Also,
depending on the option that is installed, you might need to confirm the updated
information in the IBM Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover over the chassis and pivot it down over the computer until it
4. Reconnect the external cables and power cords to the computer. See "Installing
5. To update the configuration, see "Setup Utility program" on page 24.
Types 8307, 8308, 8310, 8311, 8314, and 8315
After working with options, you need to install any removed parts, replace the
cover, and reconnect any cables, including telephone lines and power cords. Also,
68
Hardware Maintenance Manual
or loose screws are left inside your computer.
snaps into place.
external options" on page 31.
or loose screws are left inside your computer.
snaps into place.
external options" on page 31.