Table of Contents
Advertisement
Installation
3.3 WALL MOUNT INSTALLATION (INDOOR/
OUTDOOR)
Make sure to disconnect the power adapter before installing
the camera. Camera will begin moving immediately when
power adapter is connected.
Camera can be installed to a wall using the included wall mount. This
method is suitable for indoor or outdoor installations.
To install the camera:
1. Make sure the O-rings (3x) are
attached to the top of the pendant
cap (spares are included). Firmly
insert the pendant cap on to the
wall mount bracket and twist to
tighten all the way. Insert the
bracket screws (3x) to secure
pendant cap to wall mount
bracket.
2. Use the back of the wall mount to
drill holes for the mounting
screws. If you are running cables
through the wall, also drill a hole
for the cables. Run the single end
of the cable through the wall
mount and attach the wall mount
to the wall using the wall
mounting screws (4x) supplied
with the wall mount.
NOTE: Use the included drywall anchors if installing in drywall.
8
1
2
Advertisement
Table of Contents
