Information For The Authorised Dealer; Programming The Driving Behaviour - Meyra 2.445 Operating Manual

Information for the author-
ised dealer
A service manual containing a check
list for the annual inspection is avail-
able on request.
The functional tests necessary for the
inspection are listed in the check list.
They are a guide for the performance
of the inspection work.
☞
Note:
It does not outline the actual scope
of the necessary work which can
only be ascertained by an inspec-
tion of the vehicle.
After the successful completion of
an annual inspection the inspection
should be recorded in the operating
manual.
Programming the driving behav-
iour
The driving behaviour of the wheel-
chair can be adjusted through the
programming device.
☞
Therefore observe the respective <
Service manual >.
The driving features of the wheelchair
should be adjusted to the individual
requirements and the learning proc-
ess of the respective user at regular
intervals.
In doing so the driving experience,
the physical limits of the user and the
main fi eld of operation must be con-
sidered:
▲
When programming the delay val-
ue observe that on the one hand
extreme braking may endanger
the driver but on the other hand
the braking distance may not ex-
ceed 1.0 m at 6 km/h,
1.5 m with 8 km/h,
2.0 m with 10 km/h,
2.5 m with 12 km/h and
3.5 m at 15 km/h (acc. to EN
12184).
▲
The programming must be special-
ly tailored to the user. The capacity
of reaction, the constitution as well
as physical and psychical abilities
are to be considered. A talk with
the doctor or therapist can be very
helpful.
85