Adjusting the height of the foot-
plate
Loosen the clamping screw (1) to ad-
just the height.
Telescope the foot plate to the desired
height and then retighten the screw.
☞
Note:
The maximum setting is marked by
a guide slot (2).
Angle adjustable footplates
(Option)
After loosening the clamping screw
(5) pull out the dovetail connection
and adjust the angle of the footplates.
Afterwards retighten the clamping
screw (5)
Attention:
!
Ensure that the footplate has suf-
fi cient ground clearance.
The setscrew (6) serves to horizontally
correct the angle of the footplates.
52
5
1
2
6