To use UDF formatted DVD-RAM, DVD-RW, DVD+RW, or CD-RW media in other
computers, a UDF reader is included on the User's Guide and Software Super CD. To
use the UDF reader, follow this procedure:
1. Insert the User's Guide and Software Super CD into the CD or DVD drive of the
2. Click Start.
3. Click Run.
4. Type e:\UDF\language where e is the drive letter of the CD or DVD drive, and
5. Click OK.
6. Double-click SETUP.EXE and follow the on-screen instructions.
Note: The UDF reader is only needed on systems that do not have another DLA
Enabling the DMA setting
This section explains enabling the DMA setting with Windows 2000 and Windows
XP.
For Windows 2000
10. Click OK to restart the system.
For Windows XP
10. Click Close to close the System Properties window.
2-6
IBM ThinkPad Multi-Burner Plus Ultrabay Enhanced Drive: User's Guide
computer you want to use the UDF formatted discs with.
language is your language.
program for CD-RW, DVD+RW, or DVD-RW installed.
1. Click Start, move the cursor to Settings, and click Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using the
ThinkPad A21e computer.)
7. Select the DMA is available as the Transfer Mode.
8. Click OK.
9. Click Close to close System Properties window. A message is displayed,
informing you that the system settings have changed.
1. Click Start, move the cursor to My Computer, and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using the
ThinkPad A21e computer.)
7. Click the Advanced Settings tab.
8. Select DMA if available as the Transfer Mode.
9. Click OK.