Programming Keys; Supervision Programming - Nortel i2004 User Manual

Programming keys

Programming keys
The five black keys on the top of the display screen are customizable. Each allows the
programming of an internal number that can be supervised.
Supervision allows you:
to see the state of supervised set(s) according to the associated icon:
•
• to intercept the calls of the supervised set, press the customizable
key with the blinking icon.
to call one of the supervised sets directly, press the corresponding
•
customizable key.

Supervision programming

Select
Key
Modify
or
Superv.
18
Free
Erase
Called
1. Press the Services
2. In the Services
"Program a key" option and confirm by
pressing the Select
3. To the "What do you want to program
message, answer by pressing the
interactive Key
4. "Press the selected
prompts you to select the key.
The display screen indicates the state of
the selected key:
programmed",
5. To modify the state of the key, press the
interactive Modify
(In case you want to cancel the
programming of the key, press
and follow the instructions.)
6. To the "Type of service
answer by pressing the Superv. key.
Busy
key.
menu, select the
key.
key.
key" message
"This key is not
"Supervising on"...
key.
Erase
?" message,
?"